Speedway R420 Medium/White Antenna RF Cable CA195

Description

Connect Speedway R420 RFID Reader directly to eChain 5x5in Circular UHF RFID Antenna

Speedway R420 Medium/White RFID Cable is a flexible, medium shielded CA195 RF cable for use indoors to connect Impinj R420 RFID reader to UHF RFID antennas at medium distance from the reader (1 – 6 meters).  Cable has SMA (male) to SMA (male) endpoints and a R-TNC Adapter that screws-on to SMA endpoint to provide connectivity directly to the Impinj R420 RFID Reader.

Cable can be used in multiple configurations – not just for R420 connectivity.

Compatibility

Includes

• White/Light Gray CA195 Cable – SMA (male) to SMA (male)
• R-TNC (male) Adapter

Please note, cables are custom fabricated to order.  Please allow 3-5 days for processing.

Length Options (Please Specify):

• 8 Feet (2.5 Meters),  Total Cable Assembly Loss: 1 dB
• 10 Feet (3.0 Meters), Total Cable Assembly Loss:  1.3 dB
• 13 Feet (4.0 Meters), Total Cable Assembly Loss: 1.7 dB
• 20 Feet (6.0 Meters), Total Cable Assembly Loss: 2.5 dB

Connecting to Speedway R420 Reader:

• Speedway R420 Reader has 4 Ports, supporting 4 directly connected antennas
• R420 Reader has RP-TNC (Reverse Polarity, Threaded Neill–Concelman) female ports
• Requires cable with RP-TNC Plug (male) connector

Connecting to 5x5in +5dBic UHF RFID Antenna:

• These antennas have SMA (female) port
• Requires cable with SMA (male) connector

The CA195FR white jacket, non-halogen (non-toxic) low smoke, fire retardant antenna cable assemblies, jumpers or pigtails are intended for all in-building applications with the exception of plenum air return requirements. These are professional quality antenna cables which are UL/NEC and CSA rated as ‘CMR’ and ‘FT4’. They also meet FAA FAR25 requirements. These also meet the MSHA-P mining technical requirements although not yet put through the certification process. These cables are constructed with precision manufactured connectors. CA195FR is equal to Time’s Microwave’s LMR-195-FR. These 50 ohm impedance cables used in wireless applications have an outer jacket diameter is 0.195 inches (4.95 mm). Each antenna cable is tested for VSWR and insertion loss and is guaranteed to be the highest industry quality.